Single Axis Robot KS Series

Short Description:

Precision industry 


Product Detail

Product Tags

FEATURES
1. Reasonable price
2. Clean room
3. Class 10-100 Stainless covers Already installed AC
4. servo motor (optional)
5. High repeatability ± 0.01mm
6. Dust proof
7. Support different strokes

APPLICATIONS
1. Precision industry
2. FPD industry
3. Semiconductor
4. Medical applications
5. FPD glass transfer
6. Inspection & testing equipment

Precision
1.Positioningaccuracy

The maximum difference(absolute value)between the actual arrival distance and the reaching distance based on the original setting.


2. Repeatability of round-trip position (precision)
The maximum difference in theentire cycle.The difference in the positioning value measured from a setting position during the round trip movement of the Single Axis Robot’s slider.


3. Running parallelism

a: The parallelism between Single Axis Robot module platform plane and module installation plane. Position the
scale at the center of the slider,and then put the pointer on the installation plane. Finally, take the maximum deviation value measured in the full stroke as the result.

b: The parallelism between Single Axis Robot module platform and the installation datum. Position the scale at the
center of the slider,and put the pointer on the installation datum. Finally, take the maximum derviation value measured in the full stroke as the result.



Installation

If the ballscrew is used in the vertical direction (Z axis),the load should be within the maximum value indicated for vertical loading. Vertical installation using timing belts is forbidden.

*Attention: To prevent the load from slipping off, a brake system is recommended on the motor when the KA
module is installed vertically.


Service Life

For horizontal, side or slopelless than 30 degrees] orientation, the service life is dependent on the quideway, as for vertical orientation, the service life is dependent on the ballscrew or fixed bearing which ever one is shorter.
The listed dynamicload [Fy, Fz, Mx, My, Mz] is based on a service life of 10,000km of travel. If the load isless than the loading condition (Fy/Fyd+Fz/Fzd+ Mx/Mxd+My/Myd+Mz/Mzd )≤1).the seryice Life could be extended.If the load is over, the service life will be less than 10,000km. To ensure long term use,it is recommended that the loading be within the listed range.


Maintenance

All the related accessories, ballscrew and quideway need to be maintained. After every 3 months or 100km travel distance, it is recommended to add grease to the ballscrew and guideway. Clean any dust or debris from the system. Replace the grease ifthere is any color change. If you have any further questions, please contact HIWIN.




  • Previous:
  • Next:

  • Write your message here and send it to us